RCF HDL 6-A 2 x 6 Active Line Array Module - Black LINE ARRAY SPEAKERS
SHIPS IN 3-5 DAYS
RCF HDL 6-A 2 x 6 Active Line Array Module - Black LINE ARRAY SPEAKERS
SHIPS IN 3-5 DAYS
RCF HDL 6-A 2 x 6 Active Line Array Module - Black LINE ARRAY SPEAKERS
SHIPS IN 3-5 DAYS
RCF HDL 6-A 2 x 6 Active Line Array Module - Black LINE ARRAY SPEAKERS
SHIPS IN 3-5 DAYS
RCF HDL 6-A 2 x 6 Active Line Array Module - Black LINE ARRAY SPEAKERS
SHIPS IN 3-5 DAYS
RCF HDL 6-A 2 x 6 Active Line Array Module - Black LINE ARRAY SPEAKERS
SHIPS IN 3-5 DAYS
RCF HDL 6-A 2 x 6 Active Line Array Module - Black LINE ARRAY SPEAKERS
SHIPS IN 3-5 DAYS
RCF HDL 6-A 2 x 6 Active Line Array Module - Black LINE ARRAY SPEAKERS
SHIPS IN 3-5 DAYS

RCF HDL 6-A 2 x 6" Active Line Array Module - Black

RCF

  • $2,604.00

SHIPS IN 3-5 DAYS


Price Match Will not ship until

The HDL6-A is the ideal choice when line array performance is needed and a fast and easy set-up a must.

RCF HDL6-A overview

The black HDL 6-A Active Line Array Module from RCF is a 2-way active line array module designed for live sound reinforcement and installed sound applications. Powered by a 1400W 2-channel class-D amplifier, it features two 6" neodymium woofers for a solid bass reproduction and a 1.7" voice coil compression driver mounted on a precise 100 x 10° waveguide. The powerful DSP processes the sound including crossover, phase correction, limiting, and protection. The system accept female XLR input connectors and line-level signals from a mixing console or other signal source. The output XLR male connector provides a loop-trough for speaker's daisy chaining. The volume knob controls the volume of the power amplifier. The control ranges from maximum attenuation to the maximum level (maximum output).

  • Equipped with two aluminum rear handles for portability
  • Features RCF transducers
  • Integrated mechanics are both fast and reconfigurable, allowing the system engineer to create J-shaped or spiral arrays
  • Wooden reinforced composite polypropylene enclosure
  • Integrated processing and cabling reduction
  • Digital amplifier with switch mode power supply and DSP controlled input section with selectable presets
  • Powered by a 1400W peak power digital amplifier, split 400W for the HF, and 1000W for the LF
  • HF projection is adjusted by the button on the rear of the cabinets
  • 2.0" inside-outside voice coil
  • Water-resistant fiber doped cone
  • Polycotton M-roll surround
  • High-power magnetic structure
  • Inside/outside coil doubles the dissipation surface
  • Adhesion area to the former is doubled
  • ND 340 high-power compression driver
  • 1.7" voice coil with a crossover point of 900 Hz
  • Coverage and dispersion control
  • Edge wound voice coils
  • Linear frequency response and maximum SPL output


RCF HDL6-A specs:

  • Acoustic Specifications
  • Frequency Response (-3 dB) 65 Hz to 20 kHz
  • Maximum SPL 131 dB
  • Horizontal Coverage Angle 100°
  • Vertical Coverage Angle 10° maximum
  • Compression Driver 1.0" (2.5 cm) neo, 1.7" (4.3 cm) voice coil
  • Woofer 2 x 6" (15.2 cm) neo, 2.0" (5.1 cm) voice coil
  • Input
  • Input Connectors XLR male
  • Output Connectors XLR female
  • Input Sensitivity +4 dBu
  • Power Indicators Power cord is connected and the power switch is turned on this indicator lights green
  • Signal Indicator Signal indicator lights green if there is signal present on the main XLR input
  • Limiter Built-in limiter circuit to prevent clipping of the amplifiers or overdriving the transducers
  • Processor
  • Crossover Frequencies 900 Hz
  • Protection Thermal, RMS
  • Limiter Soft limiter
  • Controls HF correction
  • Amplifier
  • Peak Power Total: 1400 W
  • High Frequencies: 400 W
  • Low Frequencies: 1000 W
  • RMS Power Total: 700 W
  • High Frequencies: 200 W
  • Low Frequencies: 500 W
  • Cooling Convection
  • Connection VDE connector in
  • Physical
  • Hardware Array fittings
  • Cabinet Composite PP
  • Handles 2 back
  • Dimensions 9.3 x 18.5 x 15" (23.7 x 47 x 37.7 cm)
  • Weight 25.4 lb (11.5 kg)

We Also Recommend